Aerojet Jobshttp://jobs.aerojet.com2012-05-25 04:31:13.776635USACulpeperAssociate Chemist Job ID: 7212 # Positions: 1 Location: US-VA-Culpeper Experience (Years): .. Posted Date: 4/23/2012 Category: Chemistry More information about this job: Overview: After orientation and training, performs entry level professional chemist assignments under general supervision and following established policies. Responsible for performance of chemical research and analysis tasks to support propellant development and characterization, chemical synthesis and characterization, material qualification and compatibility. Work with production manufacturing on areas of propellant processing. Essential Job Functions (Including % of Time for Each): After orientation and training, performs entry level professional assignments under general supervision and following established policies. The position requires some professional judgment and a limited use and/or application of basic principles theories and concepts. 25% Conduct chemical testing as required for new and production chemicals/propellants. 50% Under supervision, oversee the development and characterization of new propellants, including performing routine mathematical calculations, preparing formulations, reviewing and analyzing test data. 20% Review manufacturing data for trend analysis and interface with manufacturing engineers. 5% Complete laboratory notebooks and write reports to document findings in approved format. Requirements: This position requires a Bachelor’s degree in Chemistry or an appropriate science or an equivalent combination of education and experience. Must have an understanding of the use of process and analytical equipment pertinent to the appropriate application of skills. A demonstrated ability to effectively communicate clearly and concisely both orally and in writing is required. This position may require the use of chemical laboratory process and test equipment, and specialized analytical equipment. Basic computer knowledge in Excel, Power Point and Word. Workplace may include areas where a wide variety of chemical materials are used and stored. Must customarily have a high consciousness for personnel and equipment safety. May be required to utilize a variety of personal protective equipment. Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship). Apply for this job: * Apply for this jobonline * E-mail a friend about this job We consider the consistent demonstration of positive, cooperative, self-motivated, courteous and professional behavior to be an essential function of every position. While different positions have different primary areas of responsibility and technical expertise, everyone needs to work as a team, and we expect all employees to contribute as necessary to get the job done. Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC 1324b(a)(3). Aerojet is an EEO Employer, M/F/V/D Individuals with a disability requiring accommodation during the application and/or the interview process should e-mail the Human Resources Department atAccommodation Request.2012-04-23 20:39:54United StatesAerojetVirginia7212VACulpeper, VA28081418http://jobs.aerojet.com/xml/28081418/jobUSACulpeperSr. Quality Engineer Job ID: 7207 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 5 Zip: 22701 Posted Date: 5/16/2012 Category: Quality, Product Assurance & Test - Quality Engineering More information about this job: Overview: This position performs Quality Engineering for specific contracted space programs, including planning and implementing methods to ensure customer specifications and engineering requirements are effectively met. Under general direction, performs quality engineering assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines. Essential Job Functions (Including % of Time for Each): 50% - Provides innovative, thorough and practical solutions to a wide range of technical challenges, involving the conventional utilization of quality engineering techniques. Conceives and plans projects involving the development of new methods of dimensional inspection objectives. Reviews engineering designs and specifications for translation into inspection verification methods. 10% - Performs failure mode effect analysis of product design disclosure documents and specifications, utilizing inspection analysis tools and six sigma principles. 10% - Determines gage and instrumentation adequacy, gage R & R studies to determine process capabilities, needs and future usage. 10% - Develops, implements and reviews corrective action and process improvements by bench marking practices. 20% - Review manufacturing process planning to ensure compliance with drawing, specification and contractual requirements. Provide technical guidance to less senior quality engineers, inspection, manufacturing and test personnel SECONDARY JOB FUNCTIONS: Develop and apply new and advanced methods to meet new or unusual requirements. Keep current within area of specialty in support of Global production and R & D projects. Requirements: Bachelor's of Science degree in Mechanical Engineering or related discipline and 5 years of related technical experience (or an equivalent combination of education and experience). ASME 14.5 structure knowledge with ability to train on same platform. Up to 10% travel. Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).2012-04-19 20:22:05United StatesAerojetVirginia7207VACulpeper, VA28011760http://jobs.aerojet.com/xml/28011760/jobUSACulpeperMaterial Handler 2 Job ID: 6910 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 2 Zip: 22701 Posted Date: 5/18/2012 Category: .. More information about this job: Overview: Under minimal supervision determines routing and arranges for shipment, considering such factors as nature of items shipped, method of handling, size, urgency, carrier selection and cost. Provides physical movement of material from dock receipt, between all operating groups, storage areas, workstations, warehouses and magazines. Performs record keeping duties and inventories as required. Responsible for storing, processing stock pulls/requisitions, material transfers, while conforming to necessary record keeping standards. Safely operates all material handling equipment. Requires a CDL and Haz-Mat certification. Essential Job Functions (Including % of Time for Each): Must have extensive knowledge of material control functions and procedures. Must be able to perform all material control related activities; receiving, storing, issuing, and transporting materials. •25% Responsible for performing the following activities and creating transaction records for receipts, issues, return to stock, work in process transfers, transfers between contracts, cycle counts, audit trails, and all material moves. •20% Responsible for accuracy of data for receipts, checking packing lists against incoming freight, noting discrepancies, working with Purchasing to resolve problems, distribution of associated paperwork, filing and maintaining records of transactions. •25% Responsible for the safely loading, transporting, delivering, unloading and proper compatible storage of all different types of hazardous and non-hazardous materials. •10% Makes deliveries of packages/materials to the appropriate manufacturing or storage areas. •10% Monitors conditions of stored materials regarding identification, housekeeping, safety/compatibility, and temperature control requirements. •5% Perform routine vehicle and equipment maintenance and safety checks. •5% Performs other related duties as assigned. Requirements: High school diploma or equivalency plus 2 years of directly related experience. Must acquire and maintain current CDL with Hazardous Material certification. Must acquire and maintain 49CFR Haz-mat certification. Must be able to lift, move or carry up to 50 lbs., use hand truck, pallet jack, banding machines, knives/box cutter, and tape machines manual and automated. Must be computer literate. Must be able to obtain and maintain a U.S. government security clearance at the appropriate level (requires U.S. Citizenship).2012-03-20 18:08:05United StatesAerojetVirginia6910VACulpeper, VA27264624http://jobs.aerojet.com/xml/27264624/jobUSACulpeperProcess Engineer Job ID: 6893 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 2 Zip: 22701 Posted Date: 5/23/2012 Category: Engineering - Process Engineering More information about this job: Overview: Under general direction, performs manufacturing and quality engineering assignments requiring a wide application of advanced principles, theories and concepts in the field, plus a working knowledge of other related disciplines. Implements, coordinates and trains other personnel on LEAN manufacturing principles in the plant. Essential Job Functions (Including % of Time for Each): Responsible for providing manufacturing engineering support for developmental and production solid rocket motor programs through the application of established manufacturing engineering procedures. Prepare and maintain manufacturing process planning, provides training and guidance to shop for personnel related implementation of planning. Assist in developing and implementing processing improvements. Assignments may involve supporting theoretical and experimental investigations, and assisting in planning of resources to support production requirements. 30% - Implements, coordinates and trains other personnel on LEAN manufacturing principles plantwide. 25% - Working under the direction of more senior Manufacturing Engineering staff, and with guidance from Design Engineering, Quality Engineering and Environmental Health and Safety representatives assist in the preparation and maintenance of detailed process instructions by following established manufacturing and EH&S procedures. Perform technical supervision and troubleshooting of complex operations involved in the manufacture of propellants, bondliners, rocket motors, insulation components, insulated rocket motor cases, and composite rocket motor components. 15% - Under guidance of more senior staff, review established solid rocket motor process instructions, monitor manufacturing activities for compliance with established process instructions. Originate, prepare , and maintain detailed planning (Standard Operating Procedures) for the manufacture of propellant, bondliners, rocket motors and inert/composite components. 15% - Assist in analysis and development of solutions to specific manufacturing problems utilizing manufacturing engineering techniques such as specification of tooling and organization of work flow. Prepare process flow diagrams, lead Process Failure Mode & Effects Analysis (PFMEA), and used systematic approach and tools to identify root causes and problem solving. Perform mathematical calculations for geometric checks and chemical mixtures. Accurately report problems, solutions, and results, in concise written and oral communications. 15% - Assist in preparing for and participate in process reviews. Participate in design reviews. Interface with internal/external customers. Requirements: Bachelor’s degree in Mechanical or Chemical Engineering with two years of industrial work experience, as an associate quality or manufacturing engineer, or an equivalent combination of education and experience. Experience should include demonstrated ability in manufacturing and the ability to interpret end item drawings. Experience and training with Lean Manufacturing principles is required. Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).2012-03-09 18:21:47United StatesAerojetVirginia6893VACulpeper, VA27036939http://jobs.aerojet.com/xml/27036939/jobUSACulpeperPrincipal Chemist Job ID: 6761 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 14 Zip: 22701 Posted Date: 3/6/2012 Category: .. More information about this job: Overview: Responsible for performance of chemical research and analysis tasks to lead liquid and solid propellant synthesis and characterization, and/or combustion and diagnostics, chemical synthesis and characterization, material qualification and compatibility with an emphasis on liquid systems and other related manufacturing processes. Ramjet fuel and gas generator experience is desired. Essential Job Functions (Including % of Time for Each): 30% - Works on unusually complex problems and provides solutions which are highly innovative of solid and liquid propellants. 15% - Plans, conducts and technically direct assigned projects or major phases of significant projects, coordinating the efforts of technical support staff in the performance of assigned projects. 10% - Analyzes, evaluates and plans methods of approach and organizes means to achieve solution of complex technical problems. 10% - Reviews literature, patents and current practices relevant to the solution of assigned projects. 10% - Reviews implementation of technical products or services. 10% - Provides technical consultation to technical staff or other organizations. 10% - Strengthen the technical capacity of the organization and facilitate technology transfer by mentoring less experienced Chemists, Engineers and team members. 5% - Establishes and defines the theoretical basis and principles which should apply, the empirical test procedures to be used and the estimated time, expenses and manpower for completion of highly technical projects. Requirements: Bachelor's degree in Chemistry or a closely related scientific discipline and fourteen years of directly related technical experience in chemistry, or an equivalent combination of education and experience. Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship). In addition to the requirements listed above the desirable qualifications include: - Advanced degree in Chemistry or closely related scientific discipline - Experience in the development of solid propellants for gas generator applications - Understanding of ballistics effects as related to chemical processes - Knowledge of structural mechanical properties and effects on system level performance2012-03-06 21:25:29United StatesAerojetVirginia6761VACulpeper, VA26963241http://jobs.aerojet.com/xml/26963241/jobUSACulpeperIntern - Scientific (Chemistry) Job ID: 7022 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 0 Posted Date: 3/22/2012 Category: Chemistry - Other More information about this job: Overview: Seeking a rising college junior or senior for summer 2012 internship program to work with an experienced propellant/material chemist. The intern will learn aspects of formulation and testing of solid rocket propellants and/or materials. Essential Job Functions (Including % of Time for Each): 50% - Hands-on laboratory working environment to include development and testing of propellants/materials under direct supervision of an experienced chemist. 50% - Analysis of test data and trends, as well as re-formulation efforts. Requirements: Student must be a rising college junior or senior majoring in Chemistry/Material Science or other related science and have good academic standing. Basic working knowledge of Microsoft Word and Excel; Able to wear required safety equipment (provided); able to work well with a variety of people in laboratory environment. U.S. Citizenship required. Apply for this job: * Apply for this jobonline * E-mail a friend about this job We consider the consistent demonstration of positive, cooperative, self-motivated, courteous and professional behavior to be an essential function of every position. While different positions have different primary areas of responsibility and technical expertise, everyone needs to work as a team, and we expect all employees to contribute as necessary to get the job done. Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC 1324b(a)(3). Aerojet is an EEO Employer, M/F/V/D Individuals with a disability requiring accommodation during the application and/or the interview process should e-mail the Human Resources Department atAccommodation Request.2012-02-29 18:00:56United StatesAerojetVirginia7022VACulpeper, VA26837281http://jobs.aerojet.com/xml/26837281/jobUSACulpeperAssociate Program Planner Job ID: 6872 # Positions: 1 Location: US-VA-Culpeper Experience (Years): .. Zip: 22701 Posted Date: 1/31/2012 Category: .. More information about this job: Overview: Under direct supervision, determine approach to material planning objectives demonstrating an understanding and application of principles and concepts of best practices-MRP. Responsible for ensuring materials are available and ready for production use when needed to support contract requirements. Provide interdepartmental coordination among other functional disciplines and coordinate the shop floor flow and delivery of finished product. This is an entry-level exempt position. Essential Job Functions (Including % of Time for Each): 35% - Develop and maintain detailed material plans from program requirements and MBOM to determine time-phased material acquisition and production floor schedule needs. Monitor functional progress against established schedules utilizing established MRP methodologies. 35% - Coordinate and maintain material acquisition and fabrication status with other functional departments. Coordinate the flow of work between or within departments to expedite production or as a basis for materials acquisition. 10% - Execute priorities for incoming inspection to allow materials to be released for use in production. 10% - Report on material availability shortages to functional departments and management. 5% - Coordinate end item delivery with other departments. SECONDARY FUNCTIONS: 5% - Other duties as assigned. Requirements: This is an entry-level exempt position typically requiring a Bachelor’s Degree in an appropriate discipline or an equivalent combination of education and experience. Must be able to develop material requirement plans, write material requisitions, initiate orders and coordinate materials/hardware requirements with inter-organizational functions, and schedule and expedite receipt of materials to support manufacturing requirements. Additional consideration will be given to candidates with the following preferred job skills: Experience with an automated MRP system (Oracle preferred). Understanding of the integration of MBOMs, MRP, and shop floor management (WIP). Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).2012-01-31 20:17:54United StatesAerojetVirginia6872VACulpeper, VA26221451http://jobs.aerojet.com/xml/26221451/jobUSACulpeperEngineering Technician, Level 2 Job ID: 7031 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 4 Zip: 22701 Posted Date: 1/31/2012 Category: Engineering - Other More information about this job: Overview: Under general supervision, performs tasks that are routine to moderately difficult in accordance with specific instructions and established work procedures. Essential Job Functions (Including % of Time for Each): -Prepare parts and materials for bonding using various adhesives – 25% -Prepare lay-up components using uncured rubber materials – 30% -Cutting and measuring patterns from raw materials and using hand tools and/or mechanical devices – 30% -Operate cure equipment such as an auto-clave and ovens – 15% Requirements: High School diploma plus 4 years of directly related engineering technical support experience or an Associate’s degree with a concentration in engineering and physical science plus 2 years of directly related engineering technical support experience or equivalent combination of education and experience and a thorough understanding of mechanical equipment and its operation. The ability to work with tools, both hand and electric and or pneumatic is preferred. Must be able to perform diversified, but semi-repetitive operations following standardized methods and procedures under changing conditions. In addition to the above education/experience all of the following are mandatory requirements for this position: Must be able to occasionally lift 50 lbs. Must be able to participate in the respirator program. Must have and maintain valid driver’s license. Must be able to work overtime and shift work as required Physically able to work in a manufacturing environment that will require lifting, sitting, pulling, squatting, kneeling, climbing and standing Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).2012-01-31 20:17:50United StatesAerojetVirginia7031VACulpeper, VA26221450http://jobs.aerojet.com/xml/26221450/jobUSACulpeperInspector 1 Job ID: 7055 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 0 Zip: 22701 Posted Date: 1/31/2012 Category: Inspector/Test - Other More information about this job: Overview: The Inspector 1 performs routine and entry-level assignments under close supervision and following established policies. Performs standard inspections on component parts and assemblies using visual, witness and dimensional inspection methods. Responsible for strict adherence to safety and housekeeping standards. This position requires employees to enter the manufacturing areas. The hours of work will equate to those of the manufacturing areas, and overtime will be required as directed by the department manager. Essential Job Functions (Including % of Time for Each): 60%- Using calipers, micrometers and other measuring equipment, and performing inspections on rocket motors and rocket motor components under the supervision of higher level inspectors. 30%- Paperwork (writing IR cards, Discrepancy reports etc.) 10%- Entering shipping data, Discrepancy reports and oracle entries in the computer on all programs. Requirements: High School graduate or equivalent and successfully perform the essential duties of the job. Trade or Vocational School courses in drawing interpretation and basic math are desirable. Specialized equipment use is required to perform specified tasks. Must be able to climb ladder, manipulate gages, qualify for the respirator program, drive motorized vehicles (must possess a valid driver's license), carry a minimum of 35 pounds and may occasionally be required to lift and/or move materials up to 50 pounds and pass a visual acuity test. Must be able to obtain and maintain a US Security Clearance at the appropriate level (U.S. Citizenship required).2012-01-31 20:17:44United StatesAerojetVirginia7055VACulpeper, VA26221446http://jobs.aerojet.com/xml/26221446/jobUSACulpeperInspector 2 Job ID: 7054 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 2 Zip: 22701 Posted Date: 1/30/2012 Category: Inspector/Test - Other More information about this job: Overview: Under general supervision and following established policies, the Inspector 2 performs assignments requiring general use and applilcation of concepts, practices and techniques. Responsible for strict adherence to safety and housekeeping standards. Performs inspections that are not completely formalized and requires minimum judgment, with a good understanding of the related ISO 9001 elements. This position requires employees to enter the manufacturing areas. The hours of work will equate to those of the manufacturing areas, and overtime will be required as directed by the department manager. Essential Job Functions (Including % of Time for Each): 60%- Using calipers, micrometers and other measuring equipment, and performing inspections on rocket motors and rocket motor components under the supervision of higher level inspectors. 30%- Paperwork (writing IR cards, Discrepancy reports etc.) 10%- Entering shipping data, Discrepancy reports and oracle entries in the computer on all programs. Requirements: High School graduate or equivalent with (2) years related experience associated with the inspection of chemical processing, soldering, casting, inert operations (no propellant), bonding, assembly, and/or component parts. Trade or Vocational School courses in drawing interpretation and basic math are desirable. Performs inspections that are formalized and requires minimum judgment, with a good understanding of the related ISO9001 elements. Specialized equipment use is required to perform specified tasks. Must be able to climb ladder, manipulate gages, qualify for the respirator program, drive motorized vehicles, carry a minimum of 35 pounds and may occasionally be required to lift and/or move materials up to 50 pounds and pass a visual acuity test. Must be able to obtain and maintain a US Security Clearance at the appropriate level (U.S. Citizenship required).2012-01-30 20:48:52United StatesAerojetVirginia7054VACulpeper, VA26195715http://jobs.aerojet.com/xml/26195715/jobUSACulpeperEngineering Technician, Level 2 Job ID: 6898 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 4 Zip: 22701 Posted Date: 5/10/2012 Category: Engineering - Other More information about this job: Overview: Under general direction, performs diversified but semi-repetitive engineering support assignments following standardized methods and procedures under changing conditions. Assignments are of moderate complexity requiring the exercise of some discretion and limited use of judgment and initiative. Work is performed under the general guidance and direction of senior technicians or professional staff members. Essential Job Functions (Including % of Time for Each): 1. Clean, assemble and dismantle various types of tooling and equipment - 25% 2. Works with chemicals, energetic materials, igniters and related rocket motor components. This includes explosives, propellants, igniters, bond liners, primers, etc. Prepares/completes paperwork and collect data, may require performing mathematical calculations - 35% 3. Operates pressure test equipment and paint parts and motors - 10% 4. Packages motors for shipping -15% 5. Prepare parts and materials for bonding using various adhesives - 15% Requirements: High School diploma or equivalent and at least 4 years of related work experience or an Associate's degree in a related technical field plus 2 years related experience required. Thorough understanding of mechanical equipment and its operation and/or electronic repair is required. The ability to work with tools, both hand and electric and or pneumatic is preferred. Demonstrated ability to apply oneself within an assembly line type environment while completing all tasks in a sequential manner is required. Good oral and written communication skills are required. Must have the ability to complete multiple task and priorities in an appropriate manner. Needs to be able to make good judgment calls when it comes to making decisions as to process, equipment use, and safety precautions. In addition to the above education/experience all of the following are mandatory requirements for this position: Must be able to occasionally lift 50 lbs. Must be able to participate in the respirator program. Must have and maintain valid driver’s license. Must be able to work overtime and shift work as required Physically able to work in a manufacturing environment that will require lifting, sitting, pulling, squatting, kneeling, climbing and standing Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).2012-01-23 20:32:24United StatesAerojetVirginia6898VACulpeper, VA26049260http://jobs.aerojet.com/xml/26049260/jobUSACulpeperMaintenance Mechanic 3 Job ID: 6917 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 5 Zip: 22701 Posted Date: 1/16/2012 Category: Facilities/Maintenance - Other More information about this job: Overview: Will be working under minimal supervision to perform scheduled and unscheduled maintenance using manufacturer publications, blueprints, schematics and locally generated instructions. Must be familiar with OSHA and NEC standards. Will be required to follow work procedures, work on facilities and production equipment, as well as perform general maintenance. Manufacturing background preferred. Essential Job Functions (Including % of Time for Each): 50%- Mechanical Maintenance- Work with, troubleshoot and repair production equipment and facilities equipment. Perform Preventive Maintenance on production equipment (mixers, grinders, etc.) as well as production support equipment (compressors, vacuum pumps, etc.). 30%- Cross train into other shop disciplines including building equipment, general welding and millwright activities. 10%- General shop upkeep, cleaning, or organizing. 10% - Installation of new equipment. Requirements: High school graduate or equivalent plus at least 5 years of directly related experience. Training from a trade school or college is a plus. Strong Mechanical experience/training in one of the following, Machinist-mechanic, auto mechanic, general mechanic background required. Must have own required tools to perform normal maintenance duties. Continued education in a maintenance discipline and cross training into other disciplines within the department will be required. Must be available to work any shift, weekends, holidays and be on call as required. Must be very safety and environmentally conscious. Requires U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person.2012-01-16 18:18:32United StatesAerojetVirginia6917VACulpeper, VA25909442http://jobs.aerojet.com/xml/25909442/jobUSACulpeperProgram Planner Job ID: 6865 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 3 Zip: 22701 Posted Date: 4/23/2012 Category: Production Support - Program Planning More information about this job: Overview: Under general supervision and following established policies and procedures, performs professional assignments requiring general use of application of concepts, practices and techniques. Schedules and coordinates the flow of work between or within departments to expedite production or data is used as a basis for materials acquisition. Responsible for supporting program master schedule, detailed material plans, reconciliation of finished product and its scrap and material attrition. Other primary responsibilities include requisitioning and coordinating flow of materials to the shop floor and coordinating final delivery of finished product. Essential Job Functions (Including % of Time for Each): 10% - Read and interpret drawings, blueprints and specifications to determine specific program material requirements. 25% - Using Oracle system, plan, requisition, track, control and release all MBOM materials necessary to support manufacturing schedule. 30% - Develop and maintain detailed material plans from program requirements and MBOM to determine time-phased material acquisition and production floor schedule needs. Monitor functional progress against established schedules utilizing established MRP methodologies. 25% - Using written and verbal communication skills, coordinate and maintain material acquisition and fabrication status with other functional departments. Coordinate the flow of work between or within departments to expedite production or as a basis for materials acquisition. 5% - Coordinate shipment/delivery of end items with other required departments. SECONDARY FUNCTIONS: 5% - Other duties as assigned. Requirements: Bachelor’s Degree in Business or related field and three (3)years production control and/or materials planning experience or an equivalent combination of education, experience and training. Computer skills are required (Microsoft Office-Excel & Word). Administrative skills such as filing, keyboarding and general office. Must be able to obtain and maintain a U. S. Security clearance at the appropriate level (requires U.S. Citizenship).2011-12-21 23:14:13United StatesAerojetVirginia6865VACulpeper, VA25504490http://jobs.aerojet.com/xml/25504490/jobUSACulpeperSenior Chemist Job ID: 6595 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 5 Zip: 22701 Posted Date: 7/28/2011 Category: Chemistry - Other More information about this job: Overview: The Senior Chemist is responsible for leading, organizing, and implementing projects and providing chemical guidance. Specifying chemical testing, evaluation of data, and recommendations for future efforts or implementation of specific procedures is typical of the job function. Essential Job Functions (Including % of Time for Each): Evaluate and implement tractable solutions to technical problems involving the utilization of chemistry and chemical analysis techniques. 30% Technically responsible for planning, organizing, and conducting technical projects covering a broad range of technical topics. 30% Develop, plan, and promote projects independently for the implementation of novel technical approaches and cutting edge technologies. 25% Consolidate results and prepare findings for reports. 15% Requirements: Bachelor's degree in Chemistry or Material Science and five years of directly related technical experience in energetic materials; prefer PhD in Chemistry or Material Science with one year of directly related technical experience in the chemistry environment (or equivalent combination of education and experience). Knowledge of chemical principles, thermodynamics, polymer chemistry, structure/property relationships, kinetics, and data analysis is essential. Experience with energetic materials, statistical analysis, and experimental set-up and data acquisition is a plus. Work place may include areas where a wide variety of chemical materials are used and stored. May involve potential exposure to variable noise levels. Must customarily have a high consciousness for personnel and equipment safety. May be required to utilize a variety of personal protective equipment. Must be able to obtain and maintain a U.S. government security clearance at the appropriate level (requires U.S. Citizenship).2011-07-28 21:27:01United StatesAerojetVirginia6595VACulpeper, VA22697047http://jobs.aerojet.com/xml/22697047/jobUSACulpeperTest Engineer Job ID: 6308 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 2 Zip: 22701 Posted Date: 3/24/2011 Category: Engineering - Other More information about this job: Overview: Aerojet, a premier aerospace and defense company specializing in missile and space propulsion, is seeking a key contributor to be a member of its Propulsion Test Engineering team. Test engineers at Aerojet are essential in transforming program test objectives into test results. Test engineers work with customers, program managers, and project engineers to define test objectives and identify and select test methods and instrumentation. They then create plans and procedures for safely conducting these tests, utilizing existing test facilities and equipment, and/or designing new tools or techniques. Test engineers tackle a variety of problems and use a wide range of engineering skills, from mechanical and aerospace to electrical and software. Types of tests include static rocket motor firings, case proof and burst pressure testing, case structural loads testing, direct-connect ramjet/scramjet testing, aeroheat material testing, and dynamic/environmental testing. Essential Job Functions (Including % of Time for Each): 40% - Plan, devise, and prepare test methods, instrumentation, and tooling, applying extensive testing technical expertise. Interface with Design/Project Engineering to develop/interpret test requirements. Work with Quality and Safety to ensure test methods meet customer and government requirements/regulations. Identify/specify facility configurations to meet test requirements. Design test fixtures or identify existing test tooling to interface with test articles. 30% - Conduct, oversee, and support test operations in accordance with safety and quality policy and procedures, maintaining overall technical control of test programs. May include physical/mechanical hardware setup, instrumentation calibration and setup, electrical/controls setup, test article prep, control software input preparation, etc. May include directing subcontractors in their execution of subcontracted test programs at off-site test facilities. 20% - Prepare technical documentation, including test procedures, safety reviews, and test readiness reviews. 10% - Manage cost and schedule for test programs. Coordinate cost and schedule planning/estimates. Requirements: Bachelor's degree in an appropriate discipline (aerospace, mechanical, electrical engineering, or equivalent) and two years of directly related technical experience or an equivalent combination of education and experience. Work place may include areas where chemical materials are encountered. May involve exposure to various noise levels. Must customarily have a high consciousness for personnel and equipment safety. Must be able to utilize a variety of personal protective equipment. May require occasional travel to cover off-site testing (environmental or other testing). Must be able to obtain and maintain a US security clearance at the appropriate level (requires U.S. Citizenship).2011-03-24 20:12:19United StatesAerojetVirginia6308VACulpeper, VA20302485http://jobs.aerojet.com/xml/20302485/jobUSACulpeperChemist Job ID: 5907 # Positions: 1 Location: US-VA-Culpeper Experience (Years): 2 Zip: 22701 Posted Date: 5/4/2012 Category: Chemistry - Other More information about this job: Overview: The Chemist position requires coordination of multiple program efforts under supervision of a senior chemist. Chemist will be trained in the science of formulating and testing solid rocket propellants of all types, but will end with an emphasis in minimum-signature propellants. Position requires ability to analyze data for trends, make recommendations on additional testing, work well with laboratory technicians and staff. Essential Job Functions (Including % of Time for Each): 60% - Chemical analyses, routine testing, experiments where procedures are well-established and guidance is readily available. Will require work with energetic materials associated with the development and manufacture of solid rocket motor propellants. 20% - Performs a variety of routine chemistry tasks that are planned to provide experience and familiarization with the chemistry staff, as well as programs, methods, and practices of the organization. 10% - May assign work to laboratory support personnel. Must work well with others of all skill levels. 10% - Completes laboratory notebooks and writes reports to document findings in approved format. Requirements: Bachelor's degree in Chemistry or Material Science plus at least two years experience in a related job field or equivalent combination of education/experience. Demonstrated understanding of chemical principles is required. Must be able to work in a laboratory environment with chemicals and may be required to participate in the respirator program. This position requires a good understanding and use of computer routines as well as good writing and communication skills. Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).2010-09-25 19:19:45United StatesAerojetVirginia5907VACulpeper, VA17434670http://jobs.aerojet.com/xml/17434670/job